How to Install a Drain Field

Installing a septic system requires putting in a septic field. A drain field is the part of a septic system where the wastewater is dispersed into the soil for absorption and filtration. Installing one may seem difficult for the novice; however, when you have the knowledge and tools to do the Job correctly, it is actually a fAirly easy task.

How to Install a Drain Field

How to Install a Drain Field

---

How to Install a Drain Field

How to Install a Drain Field

The following is a general guide on how to install a drain field:

1. The process for installing a field will vary from region to region, so the first thing you need to do is learn about the applicable building codes and obtain a permit. As well, you will also have to learn about the necessary inspections. You should also talk to the zoning departMent in your area. You will have to present your plans to the proper local governMentdepartment to get your permit.

2. The location you choose to install the drain will require a percolation test. A percolation test measures the ability of water to soak into the ground. This test will tell you how porous the soil is and the length of the field lines that will need to be installed. The size of The tank you acquire will depend on the number of bedrooms in the home. The results of the percolation test will allow the inspector to determine the type of materials you need for it such as sand, gravel, fill dirt, and topsoil.

3. You will have to measure for the installation of the lines. Some people will use a surveyor to measure and record the dimensions.

4. Once you have the correct measurements, dig the trenches for the field lines. The depth of the fieldlines will be determined by the depth of the outlets from the septic tank. When digging field lines, make sure there is a slight slope so that there will be proper drainage.

5. Lay the drain pipes in the field line trenches and attach them to the outlets from the septic tank. Once this is done, fill the septic tank with water.

6. Fill in the field lines with the percolation test determined materials such as gravel, sand, dirt ... etc. Once you have it filled in properly, you will likely have to get another final inspection. After you pass the inspection, you can lay sod or grass plant. Remember, when you are covering the drain fields, there should be a slight mound to prevent water from draining on the property.

How to Install a Drain Field

Reading Blueprints-15 Tips to Help You Understand Drawings, Elevations and Floor Plans

Blueprints are nothing more than copies of the final plans drawn up for the home owners ' approval. Highly detailed, these docuMents contain a wealth of information. Typically, a blueprint package includes a set of drawings called elevations, illustrating exterior and interior walls. But that's not all. The package contains other drawings. One is of your building site, and another drawing illustrates the foundation of the house. The reflected ceiling plan reveals where light fixtures are to be placed.

Reading Blueprints-15 Tips to Help You Understand Drawings, Elevations and Floor Plans

Reading Blueprints-15 Tips to Help You Understand Drawings, Elevations and Floor Plans

---

Reading Blueprints-15 Tips to Help You Understand Drawings, Elevations and Floor Plans

Reading Blueprints-15 Tips to Help You Understand Drawings, Elevations and Floor Plans

In addition, each blueprint incorporates a materials list with sizes and quantities of all necessary components required to construct the building features. This information enables the contractor to compile building costs. There is one additional category of blueprints-thefloorplans-with which people are probably the most familiar. Here's an insider's guide to reading the plans to your dream home.

1. Scales and diMensions are clearly indicated.

The scale of blueprints may be 1/4-inch or 1/2-inch to the foot. Whatever the scale, it will be noted in one of the lower corners of the blueprint. All blueprints to the house are drawn to the same scale. Dimensions are noted in feet and inches. In most cases, the length and width of all the exterior walls are shown in addition to dimensions of each room. With this information in hand, you can easily determine which rooms are best sized for various family activities. You can also plan for the arrangement of furnishings.

2. Exterior walls are represented by thick parallel lines, and interior wallsare represented by thinner lines.

The placement of the walls, particularly the decisions you make regarding the interior partition walls, greatly affect the layout of your home. And, if you can understand the exact placement when you first receive the blueprints, you'll likely make fewer changes as the process evolves, cutting down on unnecessary and unforeseen "– expenses to your project.

3. Rooms are clearly labeled by function-kitchen, living, dining, etc.

Built-in items within rooms also are presented in a logical fashion. For example, as you study the documents, Fireplaces, closets and built-ins become obvious. Also apparent are the placement of kitchen and bathroom fixtures, counters, sinks, cabinetry and kitchen appliances.

4. It's easy to determine ceilingconfigurations and two-story rooms.

A series of parallel dashes across a room denotes a ceiling beam; an arrow accompanied by the word "sloped" marks a cathedral ceiling. A double-height room is easy to spot. The blueprint of the lower level bears the notation "open to above the upper level" and "open to below."

5. Doors are represented by a straight line.

When you study the blueprint of the floorplan, pretend that you are walking through the actual house. Visualize the two-dimensional blueprints in a three-dimensional form. This technique helps you transform the data and symbols into something more real. A good place to start is at the entryway. From there, you can clearly see the overall organization of the home's interior. In houses designed today, rooms are placedinto one of three zones dedicated to living (family room, dining room and living room), work (kitchen, laundry and utility rooms) or sleeping (bedrooms and corresponding bathrooms). They appear as if open with a thinner, curving line showing the space required for them to close.

French doors have two straight and two curved lines. Two overlapping sets of straight lines is the symbol for sliding glass doors. Parallel solid lines within walls are windows. Like doors, sliding window overlapping lines indicated units. As you study the placement of windows and doors, you can determine if they will permit good ventilation and natural lighting of the interior, as well as make the most of exterior views and provide sufficient access to the outdoors.

6. On the blueprintsof a two-story house, you will encounter a stAircase, revealed by a group of parallel lines.

The number of lines is equal to the number of steps. The lines are accompanied by arrows. Those labeled "up" mean that the stAircase leads to a higher level; conversely, those labeled "down" lead to a lower level.

7. Letters on the drawings serve as keys to the information listed in the margins.

For example, on the blueprint of the floorplan, a series of circled letters beginning with "A" refer to the types of doors selected. This "door" schedule, "as it is called, coordinates the location of each door, as well as the style and size. A closet door, for example, has a circled letter at the proper place on the blueprint. In reading the blueprint, the corresponding margin notationmay read something like " -0" 2 ' solid core flush door, paint-grade veneer. "

8. Openings on the blueprint for windows bear a number within a circle.

This marking refers to the list of window styles and sizes cited in the window schedule in the blueprint margin. As an example, a bathroom window may bear the designation of "1" in a circle. Looking at the schedule window, the circled 1 may be listed as a "3 ' 0" x 10 ' 2 "awning window."

9. The same approach applies to electrical symbols.

Here are some common examples: A capital "S" stands for a wall switch that controls an overhead light fixture. A capital "S" with a "3" subscript refers to a three-way wall switch. A capital "J" in a box marks the location of a junction box. A capital "L" in a circle is the site of anexterior light fixtures. A triangle indicates the location of a telephone receptacle.

10. Large letters accompanied by carets (>) pointing toward each wall refer to an elevation, or drawing, of the wall as it will appear when built.

An exterior elevation is illustrated by a large letter and a 90-degree angled line to the side.

11. The placement of appliances and fixtures is easy to determine.

The symbol for a kitchen range or cooktop is four circles within a square. Bird's-eye drawings are used to represent the refrigerator, kitchen sink, bath sinks, toilets and showers. In the kitchen, a series of dashes accompanied by the notation "DW" mark the location of an undercounter dishwasher. Look carefully to see that the appliances have been placed where you wantthem. Again, visualize yourself inside of the home, preparing meals (or doing the dishes).

12. Tile flooring also is easy to spot.

It is illustrated by an expanse of small squares in the bathroom or in front of a Fireplace drawing.

13. Elevations represent how the walls of the house will appear when built.

Interior wall elevations includes drawings of Fireplaces, cabinets and shelving, windows, doors and other desired built-in elements. Exterior elevations note the location of windows, doors and other items such as roof eaves.

14. Accompanying the elevations may be some drawings which outline the construction details.

Frequently, you'll find drawings outlining the configuration of exterior corners. Or, you may be given the foundation footings and columnbases, indicating depths and widths.

15. Sections provide a see-through representation of the house.

You can visually see how various elements of the house will align when construction is completed. This is helpful in visualizing porticos and other details of the facade, as well as outdoor decks, arcades and any decorative aspects. If this seems too overwhelming, don't try to absorb all of the information that blueprints provide at one sitting. Study them in a leisurely manner, allowing the house to reveal itself to you gradually over time. Then, when you have a firm idea of what your new log home will look like and how it will function, you'll have much more confidence in your leap of faith to start building.

Reading Blueprints-15 Tips to Help You Understand Drawings, Elevations and Floor Plans